Back to Top

1
Hi, Guest!
  • BINDER
  • COMBIMASS® AL100 / SS100 Thermal sensor for special applications

COMBIMASS® AL100 / SS100 Thermal Sensor For Special Applications

Update Terakhir
:
28 / 07 / 2023
Min. Pembelian
:
1 Unit

Harga

CALL
Perusahaan Ini Telah Berdiri Sejak Tahun 2010 dan Telah Ikut Berkiprah Dalam Kancah Kelistrikan di Indonesia. Kami Menyediakan Barang dan Jasa, Sebagai Sebuah Perusahaan Yang Bergerak di Bidang Supplier dan Contractor Electrical Kami Selalu Mengutamakan Kepuasan Costumer Jangan Ragu Untuk Menghubungi Kami

Detail COMBIMASS® AL100 / SS100 Thermal Sensor For Special Applications

HIGHLIGHT
  • Thermal flow meter for direct measurement of normal volumetric or gas mass flows
  • Flow rate measurement unaffected by pressure and temperature fluctuations (for gas temperatures up to 220°C and gas pressure up to 40 bar)
  • In an aluminium or stainless steel enclosure
  • Compact and rugged design for exceptional reliability
  • integrated analog inputs and outputs can be used to compensate operational interferences
  • Integrated options: Display, Modbus RTU, 4-20 mA HART
  • External extensions: COMBIMASS® convert for reading and correction of several signals of external sensors via Modbus, Profibus, Profinet, Ethernet IP and others
  • Easy to install and service
  • Excellent value for price

DESCRIPTION

The field transmitters of the COMBIMASS® series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 220°C. The flow transmitters apply thermal dispersion technology in order to measure directly in dry gases the standard volumetric or gas mass flow, regardless of the operating pressure and temperature of the medium (DIN 1343).

These special flow meters of the COMBIMASS® series perform fully digital signal processing. Important features of the transmitter electronics for the purposes of practical operation are the temperature compensation and the opportunity to select different measuring modes (choice between constant current or constant temperature principle).

The electronics of the COMBIMASS® AL100 is located in a compact aluminium enclosure. the enclosure of SS100 is of stainless steel. As an option for this type of enclosure a 8 digits LED display for indication of actual flow rate or totalized flow is available.

The flow transmitter gets configurated individually according to the installation situation (pipe run), gas composition and measuring range. Each flow meter will get calibrated prior to shipment at our CAMASS® calibration Lab, simulating real pipe run and operation conditions. All flow meter have an integrated calibration reserve, which can be activated later on if required.

In some applications the gas composition is changing in time, local flow profile changes on gas flow rates or stroke of control valves placed directly downstream of the flow meter. All these operational influences will lead directly to a reading falsification, if not detected and compensated simultaneously in operation.

The correction can be done in an external field housing COMBIMASS® convert or directly in the flow meter series of AL100 / SS100. These meter have additional analog inputs to read in the changing conditions e.g. humidity, gas composition, stroke of control valves etc. Integrated correction function compensates external influences on the reading.
Only corrected flow will be transmitted to the PLC. As an option also the other operation conditions can be transmitted. Integrated relay can be configurated customized and used as a counter.

As an option to the 4-20 mA analog inputs and outputs signals can be transmitted via Modbus RTU. HART is available as an option too, which uses the 4-20 mA wiring for easy adjustment of parameter during start-up or operation, if required.

As an option to the integrated display, the field housing COMBIMASS(R) convert with graphic display can be supplied for wall or stand assembly. Several flow and other process sensors can be connected to one field housing.
Graphic display is configurated and deliverd customized. All measuring values can be displayed. For transmission of the signals all common types of communication are available.
Temperature sensor

Tampilkan Lebih Banyak
Kontak Kami